DESCRIPTION
Westox WBA Primer is a water based primer based on a very fine particle size Methyl Methacrylate resin.
USES
A highly adhesive penetrating primer which “locks” into substrate to provide a mechanically stable surface for following surface coatings. It can be used on masonry, fibre cement sheets and all cementitious surfaces, or over sound acrylic coatings.
PREPARATION
Drying Time @ 20°c – touch dry 30 minutes.
(Drying times will be longer on cold or humid days.)
Coverage – Depending on surface 8 – 10m2 per Litre.
APPLICATION
The surface to be treated should be clean and sound, free from oil, grease, flaking paint, laitance and material deleterious to the adhesion of the coating system.
Repair unsound substrate.
Surface should not be too smooth.
Do not thin out material.
Apply by brush, roller or airless spray.
Apply small test area if overcoating existing coatings and
carry out adhesion test.
CLEAN UP
Wash equipment in water immediately after using.
PACKAGING
Container size – 4 Litre and 20 Litre Containers.
SAFETY
Material is water based.